HALFTIME 4BONDING PLASTER ACCELERATOR x 10 Packs
HALFTIME 4BONDING PLASTER ACCELERATOR x 10 Packs is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Why Buy From PFT Wales ?
Why Buy From PFT Wales ?
We sell Quality for profesionals
Vat Reciept Sent
Reliable Prime Like Delivery
Change your mind ? send it back.
Prices Checked regularly
Look for bundle Deals
Delivery and Shipping
Delivery and Shipping
Small items £3.50 48hr
Larger Items £7.99 24 hr
Bulky oversized £14.99 48 hr
Long over 1.5 mt £24.99 2-4 days
Small Pallet. £55.00 48 hr
Large Pallet £100.00 48 hr
HALFTIME 4BONDING PLASTER ACCELERATOR x 10 Packs
Description
Description
HALFTIME 4BONDING PLASTER ACCELERATOR x 10 Packs
HALFTIME
4BONDING?
DESIGNED BY THE TRADE FOR THE TRADE
SHORTENS THE SETTING TIME OF BONDING PLASTER
Halftime 4BONDING Plaster Accelerator is a chemical additive for use with bonding plaster. The additive creates a fast set plaster by speeding up the chemical crystal formation that causes plaster to set or harden. Halftime 4Bonding is recommended for shortening the setting time of bonding plaster. Halftime will shorten the setting time to 20 minutes, depending on the ambient temperature and relative humidity of the working environment.
USER
INSTRUCTIONS HALFTIME 4BONDING PLASTER ACCELERATOR x 10 Packs
Halftime 4Bonding is an additive that reduces the setting time of bonding plaster.
Please follow the user instructions carefully.
Failure to follow the instructions may lead to application issues.
5 SIMPLE STEPS
FOR REDUCING BONDING PLASTER SETTING TIMES TO JUST
20 MINUTES
-
Pour clean fresh water into a mixing bucket
-
Open Halftime 4Bonding sachet and whisk thoroughly
-
Gradually add plaster and whisk thoroughly
-
Continue adding and whisking plaster until smooth, lump free and it reaches the desired consistency
-
Apply exactly as normal bonding plaster and enjoy a super fast setting time.
WARNINGS HALFTIME HALFTIME 4BONDING PLASTER ACCELERATOR x 10 Packs
-
Do not add directly to the plaster, dissolve in fresh water first.
-
Avoid direct contact with eyes and skin.
-
Wear eye protection, protective gloves, long-sleeved clothing and trousers to prevent direct contact.
-
If eye contact occurs, immediately flush thoroughly with water for 30 minutes and seek immediate medical advice.
-
Wash thoroughly with soap and water after use.
-
Do not ingest. If ingested, seek medical advice immediately.
-
Once opened use within 48 hours.
-
For best before date see individual sachet.
The information relating to the application of Eazymix Ltd.'s products are given in good faith based on extensive testing, application and current knowledge when properly stored, handled and applied under normal conditions in accordance with Eazymix's recommendations.
In practice, differences in organic materials, substrates and site conditions are such that no warranty, nor liability can be inferred either from this information or from any written recommendations or from any other advice offered. The user must test the products suitability for the intended application and purpose.
Our liability is expressly limited to replacement of defective goods or to refund their price. Any claim shall be deemed waived unless made in writing to us within 30 days from the date it was or reasonably should have been discovered.
Limited Warranty
Eazymix Ltd. Warrants that the goods shall comply with their description and be free from material defect at the time of delivery. This warranty does not apply to the extent that any defect has been caused by incorrect storage or use.
FAQs
HALFTIME4BONDING PLASTER ACCELERATOR
What Would You Like to Know? For any questions that are not answered below click here and contact us
HOW MUCH QUICKER IS THE SETTING TIME?
Halftime 4Bonding will reduce the setting time to just 20 minutes. The exact setting profile will be determined by the temperature of the room, the relative humidity and the surface being plastered.
DOES HALFTIME 4BONDING AFFECT THE PLASTER?
Halftime 4Bonding has been extensively tested and does not affect the plaster mix or the resulting plastered surface in any detrimental way.
DOES THE PLASTER NEED TO BE APPLIED IN A DIFFERENT WAY?
No. Once Halftime 4Bonding is added apply the plaster in exactly the same way as normal plaster.
WHAT ARE THEY
SAYING?
CRAIG BRACEWEL
PLASTERER
I love Halftime 4bonding. I do a lot of patch and repair work. Bonding plaster normally takes two hours before you can plaster over. With this it's 20 minutes no more waiting
CALLUM DAVIES
PLASTERER
I use Halftime 4bonding whenever i am patching up after the electrician or plumber, normally we would skim the next day , not any more.
CARL BAKER
PLASTERER
I used to use cement to speed up the setting time of bonding however this is much better and more consistent i like knowing the setting time and how long i have got to get it all on.With this you get around 15 minutes working time then fully set in around 20 minutes.amazing product!!
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
