Easymix HalfTime Plaster ACCELERATOR x5 packs

Easymix HalfTime Plaster ACCELERATOR x5 packs

WHAT IS halftime plaster

HALFTIME?

DESIGNED BY THE TRADE FOR THE TRADE

SHORTENS THE SETTING TIME OF FINISHING PLASTER

Halftime Plaster Accelerator is a chemical additive for use with finishing plaster. The additive speeds up the curing process of the plaster by speeding up the chemical crystal formation that causes plaster to set or harden. Halftime is recommended for shortening the setting time of finishing plaster. Halftime will shorten the setting time by up to 60 minutes, depending on the ambient temperature and relative humidity of the working environment.

USER INSTRUCTIONS. halftime plaster

Halftime is an additive that reduces the setting time of finishing plaster.

Please follow the user instructions carefully.

Failure to follow the instructions may lead to application issues.

5 SIMPLE STEPS

FOR REDUCING PLASTER SETTING TIMES BY UP TO

60 MINUTES

Pour clean fresh water into a mixing bucket

Open Halftime sachet and whisk thoroughly

Gradually add plaster and whisk thoroughly

Continue adding and whisking plaster until smooth, lump free and it reaches the desired consistency

Apply exactly as normal plaster and enjoy up to 60 minutes extra time before the plaster sets.

WHAT CAN HALFTIME BE USED WITH?

Halftime is suitable for use with all finishing plasters. The following products are suitable:

Multi Finish Plaster

Finishing Plaster

Board Finishing Plaster

WARNINGS half time plaster

Avoid direct contact with eyes and skin.

Wear eye protection, protective gloves, long-sleeved clothing and trousers to prevent direct contact.

If eye contact occurs, immediately flush thoroughly with water for 30 minutes and seek immediate medical advice.

Wash thoroughly with soap and water after use.

Do not ingest. If ingested, seek medical advice immediately.

Once opened use within 48 hours. For best before date see individual sachet.

Eazymix Limited's only obligation shall be, to replace such quantities of product proved to be defective. The user shall determine the suitability in connection therewith. Since the product is used under conditions beyond our control, we cannot assume any liability for the results obtained or damage incurred in excess of the purchase price of the above mentioned product.

HOW MUCH QUICKER IS THE SETTING TIME???

Halftime will reduce the setting time by 30 to 60 minutes. The exact setting profile will be determined by the temperature of the room, the relative humidity and the surface being plastered.

DOES HALFTIME AFFECT THE PLASTER??

Halftime has been extensively tested and does not affect the plaster mix or the resulting plastered surface in any detrimental way.

DOES THE PLASTER NEED TO BE APPLIED IN A DIFFERENT WAY?

No. Once Halftime is added apply the plaster in exactly the same way as normal plaster.