PFT Cutmaster Insulation Board Cutter

Cutting Tool PFT CUTMASTER

even allows cutting due to its cutting height of 1,110 mm and cutting depth of 310 mm in different formats: "height" and "thick"? No problem for the PFT CUTMASTER.

Overlap cuts

Thanks to the depth stop attachment screw at the cutting bow you can easily achieve cuts for wall projections and overlaps.

Cut-outs

PFT CUTMASTER also handles cut-outs for e.g. cable ducts or waste water pipes easily thanks to its depth stop.

Mitre cuts

The cutting bow can be adjusted variably to any position. For easy handling the cutting bow locks at 45° and at 90°.

Angular cuts

The two aluminium support brackets can be continuously adjusted and locked between 0° and 90°. The support bracket on the right side ensures that the remaining part of the cut does not fall down. The angular adjustment of the aluminium cutting bow can be fixed by an attachment screw.

New: PFT CUTMASTER 1100 / 310 including cutter for rafters

The hot wire cutting tool PFT CUTMASTER guarantees a clean and exact cutting of heat-insulating panels. Therefore you don’t have material residues on the building site. Angular notched rafter cutouts for the effective exterior insulation can be achieved with the hot wire cutting tool PFT CUTMASTER including cutter for rafters in no time at all. The additional cutting wire of the rafter cut notches angular cutouts cleanly and comfortably. The PFT CUTMASTER including cutter for rafters supports you in the clean and quick working with thermal insulation composite systems.